Article

Stairlift Safety Features Explained: What Keeps You Safe

6 min read Stair Lift Comparison — Content Team

Introduction

Modern stairlifts are safe. That is not just a reassurance from manufacturers - it is a measurable fact backed by the BS EN 81-40:2020 safety standard that all UK stairlifts must comply with. The engineering that makes them safe is more comprehensive than most users realise.

This guide explains each safety feature, what it does in practice, and why it matters for the user.

Obstruction Sensors

The most important active safety feature on a stairlift is the obstruction detection system. Sensors - typically infrared beams and/or pressure-sensitive edges - are built into the footrest and carriage.

If anything enters the path of the stairlift while it is moving - a bag left on the stairs, a pet, a walking stick that has fallen across the treads - the sensors detect the obstruction and stop the carriage immediately. The lift will not move again until the path is clear.

This feature works automatically, without any action from the user. It is the reason why, in normal domestic use, collisions between the stairlift and objects on the stairs do not result in damage or injury.

Limit Switches

Limit switches are position sensors built into the rail at the top and bottom parking positions. They tell the control system precisely where the carriage is at all times and stop it at exactly the right point at each end of the journey.

Without limit switches, the carriage could theoretically travel past the end of the rail. With them, the stairlift stops at the same precise position every time - ensuring the swivel seat faces the landing correctly and the user can dismount safely.

Dual Braking System

Modern stairlifts have both electrical and mechanical braking systems. The electrical brake engages when the motor stops. The mechanical brake is an independent system that engages if motor power is lost - it prevents the carriage from moving under gravity if the motor or power supply fails.

Brooks Stairlifts describes this as follows: even in the unlikely event of motor failure, the mechanical brake prevents any uncontrolled descent. Both systems work together, but either one alone is sufficient to stop the carriage. This redundancy is a core safety requirement of BS EN 81-40.

Seatbelt

All stairlifts include a lap belt that should be worn on every journey. It works like a car seatbelt - keeping the user securely in the seat if they shift position, lose balance, or feel unsteady during the journey.

Belt types vary by model. Some use a standard clip buckle. Others use an inertia reel system (like a car seatbelt) that retracts automatically when unfastened. Some Stannah models offer up to four seatbelt configuration options, including a five-point harness for users who need maximum security. The seatbelt does not prevent the stairlift from operating, but using it on every journey is recommended practice from all manufacturers.

Swivel Seat Lock

The swivel seat is locked securely during travel - it cannot rotate while the carriage is moving. This prevents the user from accidentally rotating mid-journey, which would be destabilising.

The swivel unlock (either manual or powered) is only available when the carriage is stationary at the correct parking position. This means the seat turns to face the landing only after the journey is complete and the carriage has stopped.

Battery Backup

All modern UK stairlifts run from onboard rechargeable DC batteries rather than directly from the mains. This means that a mains power cut does not strand the user mid-staircase or at one floor with no way to access the other.

Battery capacity is typically sufficient for multiple full journeys after a power cut - most manufacturers state 3 to 4 days of normal use without mains recharging. The batteries recharge automatically when the lift is parked at a charging position, as long as the wall socket is switched on.

Key Switch and Remote Controls

Most stairlifts include a key switch that disables the stairlift when not in use. This prevents unsupervised operation by children and is particularly useful in households with young children or vulnerable adults who should not operate the lift independently.

Remote controls serve a dual safety function: they allow the user to call the lift from across the room rather than having to walk to the stairs and potentially be without support, and they allow other household members to send the lift to the appropriate end without using the stairlift themselves.

The BS EN 81-40 Safety Standard

BS EN 81-40:2020 is the British and European standard governing the safety rules for the construction and installation of stairlifts. Compliance is not optional - any stairlift sold and installed in the UK must meet these requirements.

The standard covers all the features described above and additionally specifies requirements for maximum speed, braking performance, structural load testing, electrical safety, and the minimum information that must be provided to users at the time of installation. BHTA (British Healthcare Trades Association) membership is a further marker of compliance - BHTA members are committed to a Code of Practice approved by Trading Standards.

Frequently Asked Questions

Standard safety features include obstruction sensors (stop if anything is in the path), limit switches (stop precisely at top and bottom), dual electrical and mechanical braking, a lap seatbelt, a swivel seat lock, battery backup for power cuts, and an optional key switch to prevent unsupervised use. All UK stairlifts must comply with BS EN 81-40:2020.

Obstruction sensors built into the footrest and carriage detect anything in the path of travel and stop the carriage immediately. The stairlift will not move again until the obstruction is cleared. This works automatically without any input from the user.

No. Modern stairlifts run on onboard rechargeable batteries, not directly from the mains. A power cut does not stop the stairlift mid-journey. The batteries provide enough charge for multiple journeys over several days without mains recharging.

BS EN 81-40:2020 is the British and European standard that sets out the safety requirements for stairlift construction and installation. All stairlifts sold and installed in the UK must comply with this standard. It covers braking performance, obstruction detection, structural loading, electrical safety, and user information requirements.

There is no legal requirement to wear the seatbelt, but all manufacturers and healthcare professionals recommend wearing it on every journey. It is a lap belt that prevents the user from slipping or losing position during travel, particularly at the start and stop of the journey.

Conclusion

Modern stairlifts are engineered for safety at multiple levels: active obstruction sensing, dual braking, battery backup, swivel seat locking, and mandatory compliance with BS EN 81-40. The engineering is well-proven and the UK standard is genuinely demanding.

The main contribution a user can make to their own safety is straightforward: wear the seatbelt on every journey, keep the stairs clear of objects and trailing cables, and book the annual service so the safety systems are verified regularly by a qualified engineer.

Written by Stair Lift Comparison · Content Team

Compare the top rated UK stairlift companies

Get an instant guide price now

Start Here